Name:  Password:    English   Chinese
pallet Racking You are at the Homepage > Product > pallet Racking

 Pallet racking is also called storage rack , beam pallet rack , it is composed of frame , beam and other accessory, Load capacity is 4000kg/ level, goods are put on the pallet and stored and took by the forklift.  Chipboard, steel shelf, and wire decking can be laid on the beam. This type of rack is the most popular one which is safe and conveninent . the max adjusted pitch is 11M. it is widely used in manufacturing, the third party logistics, distribution center, warehouse supermarkets etc., aslo more popular in high warehouse shelf and automation .  
             it separates started bay and added-bay, the started bay has one more frame than added one 

 back pallet support:
                the relation between rack’s size and pallet
                   ( H pallet + total height of goods  L =2w+300) =2w+300)     
 pallet racking label:

 upright section , front & hook:


 Top view of pallet racking 


Rack/Level Load Capacity List


 The beam consists of 2 hooks and beam pole which is formed  by two special made C- beam embraced together ,  this structure mades the thinkness double , that is designed according to the steel structure design theory, fully utilize the resistance of the material load capacity, with light weight, bearing capacity is strong, low cost advantage.  Beam and upright are connected by special pins , which can ensure that the beam will not fall down by external force,  If the load capacity is more than 3000kg per pair of beam , we will use 4 hooks,and use bolt of conncet  

pallet support series: 

   standard pallet support weldment, U-shaped block is designed to support the  pallet ;Do not sink welding , when installation , ride on the beam.   ink welding , values3 or 19mm laid wooden shelf,  Top of shelf is the same as top of beam ,  according to load capacity , choose 50*30 or 60*40. 
   工-shaped and 井-shaped pallet support
( disassemble)   do not sink welding .
   cylinder pallet support  2 sides of angle steel welded header,  when installation , ride on the beam , suitable for cylinder goods
   Rectangular pallet support ,  100*50 rectangular pipe , 2 sides welded header,  when installation , ride on the CC beam .    bins pallet support: 100*50 cold rolling bins with limit guard board.

 Frame : two uprights are connected by H &O bracing , thimble ,mobile footing, and Nylon self-locking bolt. It can prevent rack’s looseness effectively .  the post section is composed of  11-13 faces, it has the advantage of large moment of inertia, strong capacity, impact resistance . using the auto-pounding the hole then cold bending  technology , completely avoid the cracks which formed by concentrated force.  


 Frame protector series:Frame protecter is designed in the 2 side of frame of main walkway, to prevent truck’s crash. The material is Channel and round steel, standard height =500. we can do other height according to customer‘s requirement. Upright protector series:The upright protector  is used in sub-walkway and  corner, to prevent the crash when forklift store and take the goods,  the shape of footing is right angle, angle steel and U-shaped, standard hight =280/330, we can do other height according to custemor requirement.
 other accessory and connection:

metal plate row spacer : standard length L=300, used in 90*67&100*67 upright .
 plate row spacer: two side of C steel is welded together,  connected column by bolts, suitable of all kinds of upright. Standard length L250/300                    Plate wall spacer  one side connected with upright, the other connect with wall.
wire decking,  bending wire is welded with V reinforment , so far, it is widely used in Eurpo and USA, the surface treatment : galvanized or powering
hexagonal bolts:

Copyright ©2011 Nanjing Aivis shelve Manufacturing co. ltd Tel: 86-25-52757117 52109445
address:118# SuYuan Rd.Jiangning Eco. Dev.Zone Nanjing china P.R Fex: 86-25-52109445 Powered by